![]() |
|
|||||||
| Vehicle Issues Frequently asked questions about vehicles, parts, maintenance, and troubleshooting |
![]() |
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
I was asked today if I knew where their coach bumpers could be straightened and rechromed. In fact I do know a nice place and used them over 20 years ago when I was restoring Olds tornonados.
I talked with them just a few minutes ago if they could work on a bumper as large as a motorhome bumper. I am going to go to the shop this afternoon and measure my front and rear bumper, and send him the pictures with measurements and then he can tell me if his tanks are large enough to do the bumper. Should know in a day or so if they can. A ball park estimate of straightening the bumper and rechroming it is approx $650. If they are even close to that I believe it is a good deal. So if it works out I will post the business address and contact point so we can all get the same price etc.
__________________
Tom Warner Vernon Center,NY 1985 PT40 6V92 |
|
#2
|
|||
|
|||
|
We have NEW Chrome bumpers for the FC and fiberglass for the PT
__________________
Have a Great Day Stephen Birtles 97BMC37 http://www.dupreeproducts.com Telephone 888 668 4288 or 905 328 0162 |
|
#3
|
|||
|
|||
|
Stephen
How much are the PT bumpers? |
|
#4
|
|||
|
|||
|
I should said late model 91-96 fiberglass bumpers sorry
the early PTs used an FC bumper but it was cut into three pieces left right and centre for the generator I do have bumper which is not chromed could be cut and then Chromed it would have the cut outs for the driving lights and I would have to get the centre measurement on the bolts. Now the caveat any additional whole wold not be square holes but round I don't have a punch near big enough to punch to plate that those bumpers are made of . Blue Bird used a 600 ton press and punch to form the bumpers
__________________
Have a Great Day Stephen Birtles 97BMC37 http://www.dupreeproducts.com Telephone 888 668 4288 or 905 328 0162 |
|
#5
|
|||
|
|||
|
Thanks for the clarification steve
|
|
#6
|
|||
|
|||
|
Tom.I had my front bumper rechromed on my 85 Pt 40.They will be going back for the third time this winter to be redone (Rust problems) Original cost 1200.00Make sure you choose a good shop. Lee Condosta 85 PT 40 Holden Beach N.C
|
|
#7
|
|||
|
|||
|
I need a rear one for a 1986 PT 40 chrome any idea were to get it
__________________
David Pratt 1986 PT40 DeLeon Springs ,Fl |
|
#8
|
|||
|
|||
|
rear for an 1986 PT 40 chrome or paint
__________________
David Pratt 1986 PT40 DeLeon Springs ,Fl |
|
#9
|
|||
|
|||
|
Dave
Good luck I just got a black one for my 85. I may put the bent chrome one back on |
|
#10
|
||||
|
||||
|
Quote:
Had two pieces down on the front of my bird. Each piece cost 300 bucks. They are located in Tampa. Don't know if they can do an 8 ft piece, but I saw car bumpers there to be done. Phone #813-879-1195.
__________________
Bob Lawrence 84 PT36 6V92 Wife and 2 fur kids-Calli & Pepper Fulltiming/volunteering our way around the country |
![]() |
| Bookmarks |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FC Chrome Bumper | Stephen | Parts and Other Items For Sale | 1 | 01-28-2008 09:48 PM |