norcold 1200 error

[jkenn48105]

My Norcold 1200 fridge just quit. I'm getting a no co error on the fridge door. It's not in my owners manual. Anybody know what this is? I do not have a good feeling about this.

[yesmar]

It means no cooling. Mine does this and you must jump pin 14 to ground and it will begin to work.

The circuit board is in the upper left hand area once you take the grill off. You must take the metal cover off (which is hard) and then take a short piece of wire and place one end on the pin and the othert\ end to a ground. Once you hear a click, your fridge should be good to go. The fridge must be on and showing the error code. I think 14 is correct, but it should be the second from the left at the very top of the board.

[yesmar]

pin c15 is the correct number. It is the second from the left on the very top.

14 was wrong. C15 is correct.

After you do this two or three times, you will have to clear the memory of the error codes. They would not show me how to do that but it is a matter of pushing buttons on the inside.

rr

[jkenn48105]

I tried that but got no click and still get the no co error code.

[jkenn48105]

Hmm, I'm not at the bus now, but I will try that again when I get back to it. I take it that a norcold tech did the button pushing on the inside? I hope it's just a reset and not new heaters or such.