Wanderlodge Owners Group

Wanderlodge Owners Group (https://www.wanderlodgeownersgroup.com/forums/index.php)
-   LX and LXI Parts List (https://www.wanderlodgeownersgroup.com/forums/forumdisplay.php?f=93)
-   -   2001 lxi HWH springs (https://www.wanderlodgeownersgroup.com/forums/showthread.php?t=33270)

Silver Eagle 02-10-2019 04:11 PM

2001 lxi HWH springs
 
Happy Sunday-

looking for a set of front springs to go on my 2001 LXI -

Thanks for any any help-


MJD

al perna 02-10-2019 05:00 PM

Mat, You need to call HWH on Monday and ask for parts . I thought you had a 2000 ? I do not think it matters when it comes to springs . Now you are referring to the spring that retracts the Jack , correct ?

Silver Eagle 02-10-2019 10:52 PM

yes - the springs that retracts the jacks-

brhodes 02-11-2019 09:36 AM

1 Attachment(s)
Measure the diameter and count the number of bands on the existing springs.


Attached is the directions to replace.

rrueckwald 02-11-2019 09:39 PM

Matt,

Lon, the service manager at HWH told me springs rarely need replacing. When they do, they have often been in a salty environment. The problem is usually something else, like the solenoid valve. He also said never use silicone oil as it leaves a deposit that interferes with the seals. He said as last resort to use WD-40 if a jack won't go up all the way.

If you can get through to Lon, give him a call at HWH. Or perhaps someone here knows more about what can cause resistance.

Randy Dupree 02-11-2019 09:41 PM

last summer when i was at HWH and had a sticky jack they told me the seals were torn and hanging it up.
they rebuilt the jack and all is well.

al perna 02-12-2019 07:38 AM

good point about the sticking valve Ron . Mat did you try to open them ? There should be a t on them or a white plastic valve if they are newer . Open them up and see if they retract .

Silver Eagle 02-12-2019 09:11 AM

Hey Guys-

No problem with the operation of HWH leveling system on my bus-
I just need one spring for the front passenger side -

For some reason unknown to I- Iam missing one spring


Would like two springs for replacement - keep old spring for replacement if needed-


Thanks Again For The Help-

MJD


All times are GMT -4. The time now is 10:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.