Wanderlodge Owners Group

Wanderlodge Owners Group (https://www.wanderlodgeownersgroup.com/forums/index.php)
-   Parts Wanted (https://www.wanderlodgeownersgroup.com/forums/forumdisplay.php?f=12)
-   -   Roof Top Storage Pods (Combined threads) (https://www.wanderlodgeownersgroup.com/forums/showthread.php?t=10160)

rwoody 05-24-2011 09:00 PM

Roof Top Storage Pods (Combined threads)
 
http://cgi.ebay.com/ebaymotors/RV-St...item53e3806571

anybody got them

i know that Rick found some but the weather might have messed up the rest of them who knows right now?


thanks!:)

Rick 05-24-2011 10:13 PM

The ones I found were at Cowlaw's. I didn't buy from them but bought new instead. Can't remember what Cowlaw's wanted.

rwoody 05-24-2011 11:12 PM

llink

Rick 05-24-2011 11:29 PM

better to call and send them after what you need. It's a junk yard.

877 548 2125 Cowlaw's RV Salvage

you know I don't know how to do links.

bwinter1946 05-24-2011 11:40 PM

LinK: http://www.colawrvsalvage.com/UsedPa...7/Default.aspx

rwoody 05-25-2011 06:49 AM

thanks

always get some help on this site!!!!!!!!!!!

Crit Bliss 05-25-2011 06:59 AM

I added one last winter, it added a huge amount of space.

Finally Free 05-25-2011 09:17 AM

How do these units fasten to the roof? Do you need to do any drilling into the roof?

I've had a ski box that was NOT weather tight. In fact they desinged the ski box with drainage holes in the bottom. Are these storage units dry enough to safely store something?

Rick 05-25-2011 09:31 AM

Phill, I'm sure there are options on attachment but I used 4 large stainless screws and washers. Put a dab of sealant on the bottom of the washer. No leak moisture in the Pod so far. The screws are about 3/4 inch long and just go through the tread plate. The pod has a lip around the lid that fits over the lower 1/2 and a foam seal to keep the rain out.

Crit is right about the added storage. You can drag a huge pile of stuff up there and put it away.

gcyeaw 05-25-2011 09:37 AM

1 Attachment(s)
Here is mine. I used BIG washers made up by Rick Gunther in Ohio. mShort sheet metal screws into the diamond plate with silicone sealer along the bottom edges to hold it steady in the wind.


All times are GMT -4. The time now is 04:54 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.