Wanderlodge Owners Group

Wanderlodge Owners Group (https://www.wanderlodgeownersgroup.com/forums/index.php)
-   SP (Single Axle Pusher Unique Issues) (https://www.wanderlodgeownersgroup.com/forums/forumdisplay.php?f=59)
-   -   Water Fill Part (https://www.wanderlodgeownersgroup.com/forums/showthread.php?t=34922)

JustLoafin 09-26-2019 09:50 PM

Water Fill Part
 
Came to the bus with a puddle on the floor the other day. Pic below. Seems its coming from the fresh water fill.

The odd thing is that I have had the batteries disconnected for over a month now, and the fresh water pump has been off for at least that long. But somehow, its still dripping out? I figured the system would have bled off pressure long ago.

Anyone know where to find one of these "regulators"? I did not see a part # and it looks like some PO installed this one.

Pic:

https://www.icloud.com/sharedalbum/#B0kG4TcsmGmJ5A1

Steelwheels 09-26-2019 10:42 PM

There’s a check valve that’s normally on the fill. Your picture shows a ball valve to turn on and off the flow. There is another part that functions as the pressure reducer. Have you tried unscrewing that part with the ball valve on it ?

Where was the puddle outside or inside ?

JustLoafin 09-26-2019 11:11 PM

The puddle was on the ground outside. It seems to be leading from that water pressure regulator. Hesitant to unscrew it till I find a part to replace.

Chrome Bumper 10-05-2019 05:48 PM

1 Attachment(s)
This looks like what may work for you.

JustLoafin 10-05-2019 09:29 PM

Yea man...thanks!

dlefty 10-05-2019 11:37 PM

You don't want a ShurFlo unit. The Shurflo is too big for the ITT Jabasco unit. I made this mistake and had to order the correct Jabasco unit.

https://www.defender.com/product.jsp...4266&id=160841

Bruce 10-06-2019 10:18 AM

Dan. I am not near my unit but that Jabsco unit has a right angle outlet fitting. When you installed yours was that a problem? My original unit cracked and when I removed it there was not much room behind to do any hook ups. The cracked unit may not have been the original bit was not a right angle outlet. Thanks

dlefty 10-07-2019 10:33 PM

1 Attachment(s)
Quote:

Originally Posted by Bruce (Post 466411)
Dan. I am not near my unit but that Jabsco unit has a right angle outlet fitting. When you installed yours was that a problem? My original unit cracked and when I removed it there was not much room behind to do any hook ups. The cracked unit may not have been the original bit was not a right angle outlet. Thanks

Hi Bruce, it wasn't a problem for me but I just replaced the Jabasco because the back flow preventer failed for the second time. This time around I used an all stainless water inlet. Ambassador Marine Water Inlet, 316 Stainless Steel

The cut out for the original jabasco was larger so I took a piece of tin I had laying around and used it to fill in the void. I also picked up a Camco 23303 1/2" Back-Flow Preventer and put the on the backside. To top it off just incase the back flow preventer fails I bought a Brass Shut Off Valve that I have on the outside. If I am in a park and don't know the water pressure when filling the tank I use a Camco RV Brass Inline Water Pressure Regulator.

I did this when I had my nightstand out for my PEX plumbing project :eek: this summer. I will get around to my writeup sooner or later ;). Anyway it makes this easier getting to the backside of the inlet.


All times are GMT -4. The time now is 04:03 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.