View Single Post
Old 06-24-2019
AEmedic AEmedic is offline
Senior Member
Join Date: Jul 2016
Location: Boise
Posts: 282

I did as much or my own prep as I could. All of the Dicor is gone, I sealed some areas with polyurethane caulking and I replaced the cracked vent caps. The solar panels were installed very poorly, so I built some mounting racks out of 80/20 extruded aluminum and some curved roof mounts from Renogy. Rather than just use self-tapping bolts, I installed stainless rivet nuts. I left bolts partially threaded in each of them to locate them after it is sprayed this week.

Once I get it back, I will share pictures while I put it back together.
Chris Rogers
Boise, Idaho
2004 M380 DS
Jeep TJ Toad - LS 5.3 swap in process
Reply With Quote