View Single Post
  #5  
Old 06-02-2008
pgchd
Guest
 
Posts: n/a
Default

Nice Tool! Thanks for posting this!!! Great idea. Going to make one! My 95 42' must be different..... I had to replace 2 stripped studs this past weekend and found if I held the door in its open position up (use another person those doors are heavy) and "pressed slightly" toward the coach to open the door another 1/4-1/2 inch, that the spring comes out in the normally "open" position totally unloaded. I did notice the right side on all 8 doors have "3 holes" to choose from in the attachment tab but all mine are attached to the "lower single hole" which seems to give the door more leverage and spring....... I noticed the "higher 2 holes' will require your tool, thanks again!
Reply With Quote