View Single Post
  #9  
Old 09-30-2019
adamssam adamssam is offline
Senior Member
 
Join Date: Dec 2008
Location: Valparaiso
Posts: 289
Default

Quote:
Originally Posted by brhodes View Post
Go to Harbor Freight and buy their Tow Ball 1-1/2" box wrench which is about 18" long. The crankshaft balancer wheel uses this size nut, grind a little off the side to get it to clear the rear cross frame.


Be careful turning the engine counter clockwise as you could loosen the nut, so carefully turn it clockwise, and you may need to remove the secondary fuel filter for a little more room if needed.

Thanks Barry, I'll do exactly that. I'm assuming the Detroit rotates clockwise when running. If there is too much water present, I'm also assuming that it won't rotate manually forward....Clockwise. If it does rotate manually, I should be go to go?
__________________
Sam and Ellen Adams
1983 FC 35, Bought June 2004, Sold Dec. 2017
1991 WB Bought April 2018
Valparaiso, Indiana
Reply With Quote