View Single Post
Old 10-24-2012
MRPutz's Avatar
MRPutz MRPutz is offline
Burnin Up in Az. :-)
Join Date: Apr 2008
Location: Mesa
Posts: 4,099

Yes, Don made a very good instructional video. However, still used "China" product so my bet is within a few years he'll be doing that job again.

Also the Neutek product only uses one strip per bulb, you don't have to stack or solder anything. The ballast does not have to be removed as the Neutek product strips fit where the bulbs go. I did remove my ballasts but only because I removed each fixture and saw no need to leave them. In fact, I should probably put them up for sale!
Michael & Tami Putz
78FC35SB & 83FC35SB Wanderlodge - "Putz'n Around"
'90 GL1500 Goldwing | '67 VW Rail | '82 CJ5 Jeep | Web=
Solar =

FMCA #236459, Good Sam #17270530, Vintage Birds #1509
Reply With Quote