Thread: Welder?
View Single Post
Old 12-21-2018
MRPutz's Avatar
MRPutz MRPutz is offline
Burnin Up in Az. :-)
Join Date: Apr 2008
Location: Mesa
Posts: 4,101

I bought a small Harbor Freight MIG welder to learn with for $115 on sell. It's 120v 125a unit. It's small, cheap, works, and fits in my small FC storage bays. It was even used off my generator to repair John Finns generator slide once in Arizona after a tree attacked him at our White Tanks rally.

Keep in mind it is cheap, but it works! Duty cycle is only 20% at 90a and I've had it stop and needed to cool down, but so does my $500 Miller unit too. It's good with 1/8" material I typically weld with it.
Michael & Tami Putz
78FC35SB & 83FC35SB Wanderlodge - "Putz'n Around"
'90 GL1500 Goldwing | '67 VW Rail | '82 CJ5 Jeep | Web=
Solar =

FMCA #236459, Good Sam #17270530, Vintage Birds #1509
Reply With Quote