View Single Post
  #4  
Old 05-14-2019
Alever Alever is offline
Senior Member
 
Join Date: Jul 2016
Location: Wapakoneta
Posts: 119
Default Breakdown of brake rear brake chamber cutaway picture.

Here is a good idea of how the service parking brake assembly works. The service brake works on one diaphram with air pressure when brakes are applied to stop. The parking brake will push against the back of the service brake diaphram when there is 60 psi or less air pressure in the parking brake allowing the spring to apply pressure to the back of the service brake. It takes 60 psi of air to release your parking brake. I have attached a cutaway picture. The picture showed a non servicable type of brake chamber that cannot be taken apart for safety as the spring is very dangerous. There is also a brake protection valve in the system to keep you from overloading the brake hardware when the parking brake is applied. It reduces the air pressure to compensate for the force of the spring.

Hope this helps.
Attached Thumbnails
Click image for larger version

Name:	Screenshot_20190514-082250_Chrome.jpg
Views:	40
Size:	103.9 KB
ID:	61931  
__________________
Allen and Sara Eversman
Wapakoneta, Ohio
93 WLWB
Had 81 FC35
937-407-0079
Reply With Quote