View Single Post
  #9  
Old 10-18-2010
Bill Pape's Avatar
Bill Pape Bill Pape is offline
Administrator
 
Join Date: Jan 2008
Location: Commerce
Posts: 11,461
Default

Quote:
Originally Posted by Bob Johannesen View Post
Bill,
Of course they were two different sizes. I believe the fuel contamination (water in fuel) on the bottom sump was 1/4 inch pipe and the fuel low light was 3/8 pipe. I re-confirmed that before I turned the last few threads out! I was surprised when I didn't lose very much fuel. I tied a shop rag to my wrist and didn't get too much in the armpits! Had the plug on the allen wrench "at the ready"!

Have fun!
Thanks Just curious, Good to know standard pipe thread. Usually the easy reapairs always have a hitch.
I'll put this in the notes. I have a bag of plugs.
__________________
Bill & Patty
1988 FC, Silver Edition
Commerce, Michigan
Reply With Quote