View Single Post
Old 03-25-2020
WanderScott's Avatar
WanderScott WanderScott is offline
Senior Member
Join Date: Mar 2019
Location: Victoria
Posts: 126


This was my solution to tow a Jeep Wrangler behind a FC with Mopar wiring kit 82211156AB:

I rewired the 7-way outlet on the back of the FC to the spec in the attached photo. I had read posts in the past that suggested Bluebird wiring was different. Mine definitely was. While returning my wiring to standard 7-way specs, I replaced the outlet with a new one, which can be found here:

I then wound the following 7-way extension cord from the OE outlet straight down, around the roller, and mounted it to the hitch:

The harness with the Jeep kit (Mopar part 82211156AB) was the perfect length, threaded through one of the safety cables to keep it from hanging low, and plugged into the extension outlet on the hitch.

In the end, I didn't use any Blue Ox equipment for the wiring and avoided any new holes in the bus.

Happy toading.
Attached Thumbnails
Click image for larger version

Name:	7-Way-RV-Style-Trailer-Plug-Wiring-Diagram-1.png
Views:	20
Size:	21.4 KB
ID:	67032  
Trent S.
Victoria, British Columbia
1984 FC35RB
Reply With Quote