View Single Post
  #5  
Old 01-29-2009
fxdwg fxdwg is offline
Senior Member
 
Join Date: Mar 2008
Location: okc
Posts: 3,843
Default

What works reallywell to put the window back is to run a smooth string in the window pocket of the gasket, leaving the ends out at the top (for a vertical mount). Start the window into it's spot (bottom first) and then start pulling the string while pushing in on the window. This will drop the glass into place while flipping the gasket over it. You'll end up with the glass in place and the string out. I did this with an old Ford pickup wind shield. It works slick. You can "lube" the string with a silicone spray to make it easier.
__________________
John
96 WTOS 42'
OKC USA!


don't waste your time with a usa-spec ipod adapter- poor products with poor support
Reply With Quote