View Single Post
  #684  
Old 05-23-2019
badandy badandy is offline
Senior Member
 
Join Date: Dec 2016
Location: delavan
Posts: 2,376
Default

Cruise works! On the first try, but it's a little laggy on the set for some reason. If I drive 45, rock the toggle to set it, it sets to 40. Maybe I forgot to adjust the slack in the cable. Accel/resume/brake apply all work perfectly and it holds speed perfectly, including the hills where there's enough power to. I have to rework the cooling fan switch tomorrow and I'll go for a much longer drive then. I got a 180 on/173 off normally open switch and I'm wiring it to the NC contacts of a sealed relay. This should work perfectly with the 170 thermostats.
__________________
Reply With Quote