View Single Post
Old 08-31-2019
Kb1jkn Kb1jkn is offline
Junior Member
Join Date: Dec 2018
Location: Harwinton
Posts: 22

On our sp36 that bleeder goes to the high point on the engine and is used for bleeding air when you initally fill the cooling system. Ours ties in at or right behind the air compressor, obviously in the coolant jacket. I would assume it would do the same on your sp. The coolant air purge for the heating loop is in front of the coach and is accessed by removing the front panel, it bleeds air from the high point at the dash heater core.
Mike and Marisa Mastrobattisto
Harwinton, CT
89 SP36

Last edited by Kb1jkn; 08-31-2019 at 04:46 AM.
Reply With Quote