View Single Post
  #17  
Old 12-22-2013
sfedeli's Avatar
sfedeli sfedeli is offline
Senior Member
 
Join Date: Jan 2008
Location: Hershey
Posts: 3,215
Default

Dave... there will be a little oil, but it should not be under pressure- just weeping. The solenoids on the CC5/Cruise assembly are meant to be assembled dry. I would suggest cleaning them with a can of compressed air- like you use on computer keyboards and a little denatured alcohol, not petroleum distillates like WD40 or paint thinner. Be very careful about the small springs and set screws. Count the number of turns in or out that you use to remove each one- you don't want to affect the settings as they were originally.
__________________
Shane Fedeli
85PT40
Hershey, PA

"Savor the wine of youth, for it is a drink that can be consumed only once”
shanefedeli@gmail.com
717-645-4912
Reply With Quote