View Single Post
Old 06-12-2013
kroosmd kroosmd is offline
Join Date: Jun 2013
Location: Grandville
Posts: 47

ok, so a small update. I tested the continuity on both ground straps(engine block and frame) that go to the starter; both were good. I found the suggested Ford style selenoid and got 12v on the larger lugs but not the smaller ones. I also got 12v on the starter connection. I pulled the ford style solenoid and went to napa, no luck and went to carquest and they had to order it. A word of warning, at first the carquest guy didn't want me to see the photo because he was positive it was the correct one; it was a 6v one and then the second one he had was a 36v one. I keep pushing until we found the correct one and it will be in tomorrow morning. Again my job and kids sports may prevent installation tomorrow night but if there is light and the mosquitos are tolerable and am going for it.
Kris Roos
Grandville, mi
82 FC35 RB
Cat 3208NA

Last edited by kroosmd; 06-12-2013 at 10:35 PM.
Reply With Quote