View Single Post
  #9  
Old 08-09-2019
Randy Dupree's Avatar
Randy Dupree Randy Dupree is offline
Forum owner
 
Join Date: Dec 2007
Location: Port St Joe,Fl
Posts: 35,837
Default

A 2 second search found this on the web.
The oil sending unit for the dash gauge will be located close to the oil filter. It will have from 1 to 3 wires depending on type. It will have a fitting on the bottom that screws into a port near the oil filter. It will normally be round with a slight rounded top, although the shape could be different on yours.

There is an oil sending unit on the engine also but that only transmits information to the ECM and not the dash gauge. That may be what you purchased from Cummins and you should not attempt to change it. It will look nothing like what I described above.
__________________
__________________
DO NOT SEND PM
email me at randy@randydupree.com only.

Randy Dupree
2000 LXI 43
Bainbridge,Ga.
Port St Joe Fl.
www.buybyebluebird.com

randy@randydupree.com
Reply With Quote