View Single Post
Old 09-30-2019
Captain Fred Captain Fred is offline
Senior Member
Join Date: Dec 2017
Location: North Billerica
Posts: 200

I plan to move the control box to the ceiling after any issues are resolved.
The issues with the two red switches are that the one labeled DC Control has had the wiring removed and I have no idea which wires they were as there are no loose wires in the box.
If the one marked DC Charging is turned on it will cause the starter to engage after the engine is running so I hesitate to replace it with a fuse.
The engine will start right up but then die almost immediately unless I put 12v to the shut down relay/ fuel pump momentarily. The engine will continue to run fine after that 12v is removed until it is shut down normally.
I haven't checked the 12v charging sys yet as I removed the radiator expansion tank for repair. Should have that back in a day or 2 and will test that then.
Fred Penney
North Billerica, Massachusetts
Reply With Quote