View Single Post
  #4  
Old 10-09-2019
Dennis and Joan Dennis and Joan is offline
Senior Member
 
Join Date: Jul 2009
Location: Helena
Posts: 218
Default

On my 03 LX, there were 4 posts on the back of the monitor that went through the mounting bracket. The posts had an "o ring groove" that a metal slide piece locked the monitor in place. Remove the 2 screws on the bottom of the bracket that keep the retaining slides in place. Pull/Pry down the two metal retaining slides to release the posts. Monitor will come straight out or fall out and hurt you if no one is holding it. Be VERY careful the monitor is VERY heavy. At least a 2 person job.
__________________
Dennis and Joan
2003 LX

Last edited by Dennis and Joan; 10-09-2019 at 04:14 PM.
Reply With Quote