View Single Post
  #8  
Old 10-09-2019
Dan & Cindy Dan & Cindy is offline
Senior Member
 
Join Date: Jul 2009
Location: Broussard
Posts: 686
Default

I've posted detailed instructions a few years ago. Will try to find them but from memory you will need to:
1. remove the lower cover held in place by the four snap latches
2. disconnect accessible cables
3. find the two metal strips at the base of the bracket that extend upwards
4. remove the retainer screw from each strip
5. get help to secure / catch the monitor
6. pry the strips downward about an inch to unlock the mount's keyhole system
7. pull the monitor away from the mount.
8. disconnect any remaining cables
__________________
Dan & Cindy
2004 M-380
Broussard, Louisiana
Reply With Quote