View Single Post
Old 06-09-2013 is offline
Join Date: Mar 2011
Location: Lowell
Posts: 39


I have an 82 also and in fact I have experienced a similar issue twice. First time I was able to hot wire the bus and shortly after hot wire procedures were complete I found my AT switch in the incorrect position.

Second time I found the ignition key type switch needed to be cleaned. My ignition key type switch was getting very hot. I purchased a new switch which got even hotter so I went back to the old one.

I live just east of Grand Rapids and I have a test light & a spare switch. If you want a hand I can stop by. 460 9388 Peter
Peter Haefner
Lowell, Mi
82 FC
Reply With Quote