View Single Post
Old 01-11-2008
Rob Robinson's Avatar
Rob Robinson Rob Robinson is offline
Forum Moderator
Join Date: Dec 2007
Location: Victoria
Posts: 4,390

The problem with my genny is most likely within the genny itself. The regulator is new. The problem manifests itself in 'strobing' lights. The incandesant lights flicker and this flickering does not go away until a really large load is put on the genny (two or three AC units). Power Tech folks in Florida think it may be one of two electrical fault within the genny circuitry or a mechanical fault where the armature is not running true (ie possible bad bearing)
Reply With Quote