What did you do with your Bus today

[shaaksma]

Originally Posted by 78bbird

https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1 Try this?
Brand: LOYALHEARDY, ASIN B08LM5ZVXX 23 x 20 cook top. NG/LPG.
I tried to get the best fit for my kitchen.
Sink: etrailer.com Better Bath single bowl RV kitchen sink, 25" long X 15" wide it dropped right in the old hole.
Tip: I used a magnet on a rod to hold the "L" bracket and gripper holder to hold the wing nut & install, then tighten with ex long nose plyers.

Cool. Looks good. We have a single bowl with drain to a side in the house. It frees up space under the counter with garbage disposal to one side and allows for washing large pot/pans.


Thanks for sharing.

[Kiwi3]

Just for you folks up North, we're finally going to get below freezing here in Alabama. Probably for at least an hour tomorrow. So it was finally time to put the warmers in the water bay. I love Southern winterization.

[Big Al]

Originally Posted by Kiwi3

Just for you folks up North, we're finally going to get below freezing here in Alabama. Probably for at least an hour tomorrow. So it was finally time to put the warmers in the water bay. I love Southern winterization.

That’s rough. Can you handle it?

[Randy Dupree]

I had to put on long pants today and a hoodie.
its was chilly all day.
Breezy too.

[shaaksma]

Installed a wet bar faucet in bath. We should be able to fit two hands under the water at once now.

https://www.amazon.com/RODDEX-Stainl..._t1_B075294KMD

It's a little bigger than expected, but OK for now.

[rotaryjohn]

serviced the generator, new belt, oil change/filter, radiator flush and new hoses, well all except one hose, having trouble matching up the lower hose from block, no part numbers on forum match anything 4 different parts stores had. Doesn't help that there are no specs listed on hoses for inlet/outlet diameters.

[Randy Dupree]

Originally Posted by rotaryjohn

serviced the generator, new belt, oil change/filter, radiator flush and new hoses, well all except one hose, having trouble matching up the lower hose from block, no part numbers on forum match anything 4 different parts stores had. Doesn't help that there are no specs listed on hoses for inlet/outlet diameters.

Take the old hose,go to your parts store and ask to look at the hoses.
Use your imagination and keep looking.
You will have to cut up a hose to get the one you need out of the middle.
I always try to find a long hose with 2 different bends,hoping i can get a daily double,2 hoses out of one.
I just did this a month ago,i think i ended up buying 2 hoses to get the shapes i needed.

[Jeff]

Am finally in our new digs
2 yrs of craziness
Looking forward to getting Moonshadow back on the black top

[Bluebird Bob]

Got the rest of the lith batteries and the Magnum mounted today. Added an external fan on a thermostat to help with clothing compartment heat.
Works good. Have 550 amp hours with this batteries. Will cut off power at the post after the 1st of year and see how long they will go without a charge.

[jyclegg]

Originally Posted by Jeff

Am finally in our new digs
2 yrs of craziness
Looking forward to getting Moonshadow back on the black top

Did you sell the Feradina house?