Wanderlodge Owners Group  
BuyByeBlueBird.com
WOG Gear

Go Back   Wanderlodge Owners Group > Mechanic's Corner > LX and LXI (Unique Issues)

LX and LXI (Unique Issues) If you have a unique issue with your LX or LXI model coach and it can't be answered in one of the other forums here, then this is where you can list it, WITH THE EXCEPTION OF THOSE ISSUES INVOLVED WITH ANY LAWSUIT.....list your LX and LXI Parts here too.

Site Search:
Reply
 
Thread Tools
  #11  
Old 1 Week Ago
Rick's Avatar
Rick Rick is offline
Senior Member
 
Join Date: May 2009
Location: Bellefonte
Posts: 11,948
Default

Quote:
Originally Posted by Pjanecke View Post
Thx for the lead - unfortunately the line from my Shrader valve heads directly forward through the bulkhead. So l’ll need to get the bus on stands to investigate it.

I did find leaks at the footrest slide and door lock solenoids - waiting for parts to arrive.

Still can’t find where the pressure switch for the steps is hidden?

The Shrader valve is under the engine hatch at the rear of the coach. Raise the hatch and look right above the bumper toward the curb side of the coach. It looks like a valve stem for a car tire. What you are seeing that deadheads into a bulkhead is the air chuck to attach an air hose to air up your tires or beach toys.


The pressure switch for the steps is mounted on the inside edge of the step frame. At least that's where I've always found it.
__________________
Rick Shawver
1SG Ret
2000 LX
Vise Grips
Bellefonte, AR
F127656
Reply With Quote
  #12  
Old 1 Week Ago
Pjanecke Pjanecke is offline
Member
 
Join Date: Dec 2016
Location: Seabrook
Posts: 59
Default

Quote:
Originally Posted by Rick View Post
The Shrader valve is under the engine hatch at the rear of the coach. Raise the hatch and look right above the bumper toward the curb side of the coach. It looks like a valve stem for a car tire. What you are seeing that deadheads into a bulkhead is the air chuck to attach an air hose to air up your tires or beach toys.
i did a bad job explaining - we’re both talking the tire valve in the engine bay. It’s hose runs past the starting batteries and forward through the crossmember above the transmission. Have to lift the bus to see where it goes next.

Quote:
Originally Posted by Rick View Post
The pressure switch for the steps is mounted on the inside edge of the step frame. At least that's where I've always found it.
The solenoid valve body is there on mine but the “furnas” pressure switch that makes the step retract when air gets low is what I can’t find. I want to check it for leaks since I already replaced a leaky one for my aux compressor
__________________
Peter Janecke
Seabrook, Tx
2001 LXI 43
2018 Subaru Crosstrek toad
Reply With Quote
  #13  
Old 1 Week Ago
SNOWBIRD's Avatar
SNOWBIRD SNOWBIRD is offline
Senior Member
 
Join Date: Dec 2015
Location: Lansing
Posts: 641
Default

My step pressure switch is behind the lower electrical panel forward of the passenger seat.

The pressure protect valve I was talking about is t-ed off right at the schrader valve. It is a very small valve.
__________________

Sky Cheney
1998 43' LXi #F119728
Lansing, Michigan
Reply With Quote
  #14  
Old 6 Days Ago
Pjanecke Pjanecke is offline
Member
 
Join Date: Dec 2016
Location: Seabrook
Posts: 59
Default

Quote:
Originally Posted by SNOWBIRD View Post
My step pressure switch is behind the lower electrical panel forward of the passenger seat.

The pressure protect valve I was talking about is t-ed off right at the schrader valve. It is a very small valve.
Perhaps coaches like mine without the bulk oil tank don’t have that PPV.
__________________
Peter Janecke
Seabrook, Tx
2001 LXI 43
2018 Subaru Crosstrek toad
Reply With Quote
Reply

Bookmarks

Tags
20psi, 43lxi, air leak

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Slip ring replacement... Turbokitty Generators 21 10-07-2017 07:08 PM
Kubota O-ring Replacement LarryKehler Generators 7 03-01-2017 08:45 PM
Gauge Angle Ring curtsprenger General 6 05-28-2014 07:58 PM
Ring the bell...I'm done! (retirement) f.wernlein Under The Awning 7 06-21-2013 09:37 PM
Hit hard bump and buzzing alarms, bells, JackandLiz General 7 11-08-2009 07:45 PM

Web Search:

All times are GMT -4. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.