Wanderlodge Owners Group  
BuyByeBlueBird.com
Donate

Go Back   Wanderlodge Owners Group > Mechanic's Corner > Caterpillar 3208 Solutions

Caterpillar 3208 Solutions This sub-forum is hosted by Mike Hohnstein who has been at this kind of thing for 50+ years now, guess I'm addicted. The saga has been all about progressively larger shop space since then. Honestly, never wanted to get into the CAT 3208's that were originally considered to be a throwaway engine but that's all that works in a FC in my world. Same thing with my Ford toter, that came with a NA, too much effort to hang in a 6, so been at it with the CAT V-8 for 20 years now. In reality you can get excellent life out of a CAT 3208 if it's built correctly. Post your questions about the CAT 3208 engines here and Mike will try to help you out.

Site Search:
Reply
 
Thread Tools
  #11  
Old 07-12-2019
davidfaulk davidfaulk is offline
Member
 
Join Date: Feb 2017
Location: Santa Clara
Posts: 40
Default

The magnetic htz tach seems easy enough. Can you recommend a good looking wanderlodgey dash gauge to match? It prob wont work with the stock gauge because the old sender was a DC sender
__________________
1978 FC31
Reply With Quote
  #12  
Old 07-15-2019
davidfaulk davidfaulk is offline
Member
 
Join Date: Feb 2017
Location: Santa Clara
Posts: 40
Default

Seems too easy to plug a sensor into the bell housing. Will I need a new gauge to match the sender or can I use my 1978 Teleflex? Did you need to calibrate? Also in the photo is there a plate is missing on the bottom of the bell housing? I see lot's of threads where bolts are missing
Attached Thumbnails
Click image for larger version

Name:	IMG_5403.jpg
Views:	29
Size:	200.8 KB
ID:	62999  
__________________
1978 FC31
Reply With Quote
  #13  
Old 07-16-2019
Mike Hohnstein's Avatar
Mike Hohnstein Mike Hohnstein is offline
Senior Member
 
Join Date: Jan 2008
Location: NW Milwaukee Metro Area
Posts: 4,432
Default

New tach w/matching sender required. Ring gear has 134 teeth. Screw sender in to contact teeth, back off half a turn.
https://www.google.com/search?q=Tach...hrome&ie=UTF-8
__________________
Mike Hohnstein
FMCA 97824
'83FC35rb
Germantown, WI/Myrtle ID
www.AutoTransDesign.com

http://s767.photobucket.com/user/mhohnstein/library/
Reply With Quote
  #14  
Old 07-16-2019
CarneyRacing's Avatar
CarneyRacing CarneyRacing is offline
Senior Member
 
Join Date: Jul 2017
Location: Pewamo
Posts: 77
Default

Quote:
Originally Posted by davidfaulk View Post
Seems too easy to plug a sensor into the bell housing. Will I need a new gauge to match the sender or can I use my 1978 Teleflex? Did you need to calibrate? Also in the photo is there a plate is missing on the bottom of the bell housing? I see lot's of threads where bolts are missing
Mine has a cover plate there.

The hole you have pointed out doesn't look quite right to me. (I can't tell, and I'm not around mine to examine it).

Port on mine is just off you're picture. You can easily look right down the threads and see the starter gear.
Attached Thumbnails
Click image for larger version

Name:	3208 Bell housing.jpg
Views:	28
Size:	190.0 KB
ID:	63002  
__________________
Steve & Alanna George
Pewamo, MI
1979 FC35 SB
250T, 4.33
Reply With Quote
  #15  
Old 07-16-2019
Mike Hohnstein's Avatar
Mike Hohnstein Mike Hohnstein is offline
Senior Member
 
Join Date: Jan 2008
Location: NW Milwaukee Metro Area
Posts: 4,432
Default

Not every bell housing has the sender bore.
__________________
Mike Hohnstein
FMCA 97824
'83FC35rb
Germantown, WI/Myrtle ID
www.AutoTransDesign.com

http://s767.photobucket.com/user/mhohnstein/library/
Reply With Quote
  #16  
Old 08-14-2019
davidfaulk davidfaulk is offline
Member
 
Join Date: Feb 2017
Location: Santa Clara
Posts: 40
Default

Turns out Stewart Warner's new design of their tach sender can be used without the 90 degree adapter. They eliminated the analog send part. I had a bad adapter and it was a $300 3-week made to order part.
Attached Thumbnails
Click image for larger version

Name:	IMG_5411.jpg
Views:	40
Size:	201.5 KB
ID:	63537  
__________________
1978 FC31
Reply With Quote
  #17  
Old 08-14-2019
Mustang88's Avatar
Mustang88 Mustang88 is offline
Senior Member
 
Join Date: Jun 2012
Location: Lumby
Posts: 437
Default

Hi David, do you have part numbers etc for the fix? I have same problem. Thanks, Kevin
__________________
Kevin Barnett
Lumby, BC, Canada
1979 FC35SB
the (SLO-CAN) :
Reply With Quote
  #18  
Old 08-14-2019
davidfaulk davidfaulk is offline
Member
 
Join Date: Feb 2017
Location: Santa Clara
Posts: 40
Default

I got mine from summit racing...
Stewart Warner - Hall-Effect Sender: P/N 82623B
https://www.summitracing.com/parts/SWW-82623B
Reply With Quote
Reply

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
1999 Wanderlodge LX w/ Cummins M11, Tach not working can't find tach sender... nutark Electrical 8 05-23-2014 08:38 AM
Drive Belts on 3208 John 'n Deb Most Frequently Asked Questions About Operating Systems 5 12-03-2013 10:15 PM
Removing CAT3208 Tach Drive Shaft Katie Engine 8 01-15-2013 09:13 AM
Tach Drive Cable mskaggs Engine 2 12-03-2009 09:46 AM
1978 FC Drive Belts rsavoie FC (Forward Control Unique Issues) 6 10-18-2009 06:41 PM

Web Search:

All times are GMT -4. The time now is 08:42 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.