Wanderlodge Owners Group  
WOG Gear

Go Back   Wanderlodge Owners Group > Mechanic's Corner > SP (Single Axle Pusher Unique Issues)

SP (Single Axle Pusher Unique Issues) If you have a unique issue with your SP model coach and it can't be answered in one of the other forums here, then this is where you can list it....List your SP parts here too.

Site Search:
Thread Tools
Old 1 Week Ago
biobug's Avatar
biobug biobug is offline
Senior Member
Join Date: Jul 2013
Location: Hood River
Posts: 1,489

Sure. The aluminum vertical side piece was not bad except breaking loose the Philips sheet metal screws. The bracket then slides out, As for the plastic shroud piece I used a heat gun and a small screwdriver to break a corner loose , then a bigger one to slowly separate it from the body. Again, the screws were fun but a little impact screwdriver broke them loose. The shroud itself came off pretty easy with 3 or 4 3/8" head metal screws holding it on. A long extension (20" or so) with a drill driver backed them off easily and then it is just a matter of working it off and around the bumper brackets to take off.
Once they are off the access is great and it was a good time to clean up the venting and wiring before putting it back together.
After the new buckets were installed I did notice the new buckets sat back a little more from the front light bar by in my case that was because they were both pointing and angled so the beams were not centered.
Everything went back on easier than it came off and a little touch up paint on the screw heads and you can't tell they were out.
John Alley
Hood River, Oregon
1992 Wanderlodge 36SP

"There comes a time in a mans life where he must take the bull by the tail,, and face the situation."
Reply With Quote
Old 1 Week Ago
tintent tintent is online now
Join Date: Apr 2018
Location: Eliot
Posts: 9

I purchased a damaged sp 36 hit in the rear we patched the air to air and radiator . This weekend we made a run from north Carolina to Maine . got home and now it is time to start on the body repairs .
the rear hatch and bumper is repairable . I need a left rear lovered vent for the engine bay it measures 24 3/4 w by 37 3/4 lg outside dim .this one could be repaired however it will be a boat load of work . any one out their parting out an sp ?
Mathew Dondero
Eliot, Maine
Had fc LOOKING 380 LX
Reply With Quote
Old 1 Week Ago
Rick's Avatar
Rick Rick is online now
Senior Member
Join Date: May 2009
Location: Bellefonte
Posts: 12,056

Randy has some SP parts from a salvage SP. Have you tried him?
Rick Shawver
1SG Ret
2000 LX
Vise Grips
Bellefonte, AR
Reply With Quote
Old 1 Week Ago
dlefty's Avatar
dlefty dlefty is offline
Senior Member
Join Date: Aug 2008
Location: Somers
Posts: 484

Originally Posted by tintent View Post
I need a left rear lovered vent for the engine bay it measures 24 3/4 w by 37 3/4 lg outside dim .this one could be repaired however it will be a boat load of work . any one out their parting out an sp ?
Call Dan Hartley for the louvers. He may have what you need.

Coach Parts Inc
Phone: 727-420-6805
Email: coachparts@gmail.com
Very soon Web address: www.coachparts.net

Best Regards,
Dan Leftwich
Somers NY
1987 35FC
Reply With Quote


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
93 BB headlights PetKos Electrical 1 10-03-2017 02:05 AM
FC Headlights iamflagman Electrical 14 09-18-2012 04:25 PM
Headlights Coos26 LX and LXI Parts List 1 04-12-2012 10:20 PM
Headlights SallySummerlin Electrical 3 09-28-2011 09:03 PM
no headlights/ headlights inoperative lxi McFizzer Electrical 2 06-30-2010 03:04 PM

Web Search:

All times are GMT -4. The time now is 10:18 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.