FC cabinet rim / trim re-wrap

[Rowan]

I was curious if anyone has tips or tricks for removing the leather/vinyl-looking wrapped trim that edges the various cabinets / end tables in an FC? You know the little rim that keeps stuff from sliding off.

Thinking about re-wrapping if they're not too hard to remove.

Not my coach in the photo, just using for reference

[Ernest Ekberg]

I believe there are screws underneath- take the drawer out

[Randy Dupree]

and i think we had a member here take them off,Thornton i thing it was.

[gspappa]

Good evening.
Look underneath as there should be screws going up into that trim from the inside of that cabinet and any other piece of furniture in your bus. Look good with a good light. They are there.
Good luck!
Keep us posted!

[CrashTestDummy]

There are 90-degree clips that are screwed into the side, and then the bottom of the horizontal panel to hold the shelves in place. Once you get the shelf off, you can more-easily look to see what, if anything, is holding those spill guards on. I don't remember seeing anything obvious on the dog house shelf when I took it apart to do the cupholder mod, but I really wasn't looking for that.

[Rowan]

Thank you all - hope to get back to it some time this weekend. Doing as much exploration as I can before I take anything apart "for real"

[CrashTestDummy]

They're attached with Phillips head screws. You'll probably want a stubby as well as 'regular' length. #2, IIRC.