Longshot! Toolbox slider wanted.

[Tom442]

I don't know why anyone would remove their toolbox... but ya never know. Box would be nice but not required :-)
photo for grins.

[Darryl]

Thomas, I used directions John Finn wrote for sliders and toolbox for an FC. They are still on the WOG. Maybe you can do a search.

Darryl in Daytona

[Hspencer]

These are rated at 450lbs and can be locked in open and closed positions. There are also mounting brackets on the same page, other than that all you should need is a piece of steel bent up to make the tray. I would think for less than $200 you could have a nice new sturdy slide for your tool box.

[Crit Bliss]

https://www.etrailer.com/s.aspx?qry=...V+Cargo+Slides

This is the route I took

[D. Troit]

Originally Posted by Hspencer

These are rated at 450lbs and can be locked in open and closed positions. There are also mounting brackets on the same page, other than that all you should need is a piece of steel bent up to make the tray. I would think for less than $200 you could have a nice new sturdy slide for your tool box.

Hey Hal, Was there supposed to be a link in your post to some guides?