Looking for a 24 Volt Relay

[WRVAlpine]

Cannot find this relay for the bay door locks.

[Dieselbird01]

Originally Posted by WRVAlpine

Cannot find this relay for the bay door locks.

Here's one source:

https://www.summitracing.com/parts/bch-0332209211

[bryanaltier]

My NAPA store stocks a lot of truck parts and I believe that is where I located one.

[WRVAlpine]

John, that worked. All I found last night was from Europe.



Bryan, I tried my Napa but they couldn't cross it over.


I bought 4 of them at $4.99 from Summit. I was paying freight so figured I would get a few. Now I'll never need them and have some for other 450's.


Thank you again gentlemen!!

[Buck]

Tom, where does that relay go? What does it control?

[b1gsur]

I change mine every 2 years or so. Bay door motors are expensive, 10 of them. Use only 24V relays, relays are cheap
Bad relays can mess up the motors and if bay doors are locked when the failures occur it's no fun.

[WRVAlpine]

Originally Posted by Buck

Tom, where does that relay go? What does it control?

Buck,
Front bay drivers side where the Air compressors are for the toilet.
There should be placard on the shelf.

[WRVAlpine]

I can never get the pictures upright the first time. And I had no time when I posted them.
If I rotate them 360 degrees they come out correct.
What’s up with that?

[Prof_T]

Thanks Tom for the "heads up" on those relays. My bay door locks work fine but for the price I think it is prudent to have a set on hand. Still learning. It never stops.

[WRVAlpine]

Originally Posted by Prof_T

Thanks Tom for the "heads up" on those relays. My bay door locks work fine but for the price I think it is prudent to have a set on hand. Still learning. It never stops.

You are welcome.



Sitting here at Shipshewana this morning at the BB rally. Patty and I have meet many very nice people so far. Gotta walk around and look at all the coaches. Hope I can gain some knowledge here!


I'm gonna go put some mannequin legs under the coach to get some help