FC35 Curb side couch wanted - barrel chairs and expandable table available as trade.

[Boise_Wannabee]

Hello folks,

I'd like to replace the two barrel chairs and the expandable table in the living room on our FC35 with couch. I've got two growing daughters and they are going to kill each other sharing the queen from the driver's side.

I'll put them each in a sleeping bag on their own couch.

Boise, Idaho, but we could use uship to move gear back and forth.

Anyone want to trade or have a Wanderlodge FC curbside couch to sell?

[Dog Leg Bill]

No couch to trade but I might buy the barrel chairs from you, can you post a picture and a price if you are willing to go that route?


Ha just read my post for barrel chairs wanted and realized we've already had this conversation. Sorry long term problem with short term memory.

[lucaswillemse]

Bill, I have a barrel chair and mount I was going to install in our FC35. It came out of an FC35. If interested let me know and I can take a picture.

[2cruzers]

I have a curb side couch I am going to remove if I could figure out how to take it out. I was going to cut it apart but if I could take it out whole it would be better.
Any suggestions?

2cruzers

[Frank W.]

Originally Posted by 2cruzers

I have a curb side couch I am going to remove if I could figure out how to take it out. I was going to cut it apart but if I could take it out whole it would be better.
Any suggestions?

2cruzers

See Post #11 this thread:

https://www.wanderlodgeownersgroup.c...t=18820&page=2

[Dog Leg Bill]

Originally Posted by lucaswillemse

Bill, I have a barrel chair and mount I was going to install in our FC35. It came out of an FC35. If interested let me know and I can take a picture.

Lucas, Thank you for the offer but I need a pair.

Bill

[GEEZER]

Originally Posted by 2cruzers

I have a curb side couch I am going to remove if I could figure out how to take it out. I was going to cut it apart but if I could take it out whole it would be better.
Any suggestions?

2cruzers

. I took mine out long ago take the doors out and start removing screws holding it to the cabinet and floor if I remember correctly. After I got it out seems like it was going to be a problem getting it out the door so I just cut it apart. Good luck.